Smart Glass Conference Room in La Mirada
Project Overview
The conference room in this La Mirada office has glass on two sides. One window looks outside, past palm trees and a utility pole to the rooftops across the way. The other sits in the wall the room shares with the main office, so anyone walking past can see the full length of the meeting table. Both are wide panes in plain aluminum frames. In November 2026, our team made this a smart glass conference room in La Mirada without replacing either pane: we applied 48.5 sq ft of switchable smart film to the two existing windows, and each one now turns from clear to frosted on its own handheld remote, and back again.
Inside the La Mirada Build
- One conference room, two windows: an exterior window, and an interior window between the conference room and the office, with one film panel on each
- 48.5 sq ft of white self-adhesive smart film in total, applied to the existing glass, so the aluminum frames and the walls around them stayed exactly as they were
- Two transformers, one per window (a 30W and a 15W), each with its own receiver and handheld remote, so the windows switch independently
- Clear to an even, milky white frost at the press of a button
- Frosted, the exterior window still glows with daylight; it just stops showing the view
| Room | Office conference room |
| Glass | One exterior window + one interior window |
| Coverage | 48.5 sq ft |
| Panels | Two film panels, one per window |
| Frames | Existing aluminum frames, kept |
| Product | White smart film (PDLC), retrofit onto the existing panes |
| Power | Two transformers (30W and 15W), one per window |
| Control | A handheld remote and receiver for each window |
| Location | La Mirada, CA |
| Completed | November 2026 |
Glass on Two Sides of One Room
A conference room is usually the one room in an office designed to close. Here, the glass faces two ways. The outside window leaves the room open to anyone looking in from outdoors, and the inside window puts the table and the screen in plain view of the rest of the office. Each of the usual answers gives something up. Shades block the pane, but they cut the daylight too, sit in front of the frame and rarely seal at the sides. A fixed frosted film hides the room every hour of the day, including the hours when it is empty and the view would be welcome. Swapping in new glass would have meant ordering panes and pulling both frames.
Here we used smart film, which adds a switch to glass that is already installed. The film is a PDLC (polymer-dispersed liquid crystal) sheet, put on dry over the existing pane, so from across the room the result looks and works like smart glass. Send power to it and the liquid crystals align, letting the view straight through. Cut the power and the crystals fall out of line, scattering the light so the pane reads as soft white: the room stays bright, but shapes behind the glass are lost. Since the film sits on the panes that were already there, nothing in either wall had to be opened.
How the Room Looks Each Way
From the office side, the interior window shows the whole room when it is clear: the long table, the rows of black chairs, the outside window at the far end. Frosted, the same pane becomes a soft white screen, and the room behind it blurs to light and shadow while it still shares its daylight. The exterior window works the same way from inside the room: clear, the room keeps its view of the palms; frosted, daylight still comes in but nobody outside can see the table. Because each window has its own remote, the two switch independently, so the office side can frost for a meeting while the outside window stays clear. The two clips run in real time, first from the office side and then at the outside window. One care point: PDLC film is made to be switched, so it should spend some of every day turned off instead of sitting clear from morning to night, and letting the room go frosted after hours takes care of that. For a bigger version of this job, see the glass-walled conference rooms in Thousand Oaks, where film went onto the glass walls of four conference rooms.
Working with Smart View
What a job like this costs depends on the size and number of windows, and our smart glass cost page walks through what goes into the number. Have a conference room, a private office or interior glass you would like to close off on demand? Send us photos and rough dimensions, and you will have an estimate within one to two business days. The film is covered by our 1-year warranty, and we work under CA license #1134029. Request your estimate. Call (866) 728-9888.
Want this in your space?
Every project starts with a measurement and a written proposal. Contact us or email info@smartviewsmartglass.com with your specs.
Explore smart film · smart glass · all projects · smart glass for offices