Conference Room Glass Toggle — Beverly Hills

Filmed from behind the conference table, with its wood-grain top in the lower corner of the frame, this 29-second vertical clip points at one of the firm's two glass conference-room walls. Through the glass you can see the office break area: a refrigerator, a counter and a few chairs. The wall is made of several full-height panes, and the joints between them are easiest to see when it is frosted.

The wall is switched again and again for the whole clip, well over a dozen changes in under half a minute, and every pane changes at the same moment. It first goes frosted at about five seconds; between roughly 18 and 26 seconds it flips almost every second, so you can compare the two states back to back. Frosted, the break area disappears behind a flat, pale surface; clear, the wall is back to plain glass. In the last two seconds the camera tilts down toward the table.

What was installed: about 100 sq ft of switchable smart film applied to the existing glass partition walls of two conference rooms, with no glass torn out and under one day of downtime per room. Each room is wired to its own wall switch, and that switch is the whole control, so any staff member can frost a room as a client sits down without training. The partners wanted that privacy for confidential client meetings.

Does smart film soundproof a conference room? No. It cuts sound by about 20%, so it is a visual privacy upgrade first; it will not make a glass room soundproof.

Can two rooms be switched separately? Yes. Here each room has its own switch, so one room can be private while the other stays clear.

Controls and pricing for meeting rooms are on our smart glass conference rooms page.

The full case study, with photos and the scope of work, is on the Smart Glass Conference Rooms, Beverly Hills project page.

Want to see this in your own space? Send photos and rough measurements through our contact page or call (866) 728-9888. Most estimates go out within one to two business days.